❯
- ❯Market Explorer
- ❯Collections
- ❯Chrome Extension
- ❯API
- ❯App timeline
- ❯Blog
- ❯Partners
Top Paid Auto & Vehicles Apps in Bahrain
Top 10 Apps
AlfaOBD
AlfaOBD
AlfaOBD software for diagnostics of the vehicles produced by Stellantis (former FCA): Alfa-Romeo, Fiat, Lancia, Dodge, RAM, Chrysler, Jeep. Peugeot Boxer and Citroen Jumper are also supported. Although the software is primarily targeted for the car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.
NOTE: FCA vehicles since MY2018 have security gateway module (SGW) installed. It blocks the third-party diagnostics. To have full access to the diagnostic features, please use an SGW bypass. Owners of Fiat 500X/JEEP Renegade/Compass (MP), please make sure that the bypass supports the second high-speed CAN bus, the one that is connected to the pins 12&13 of the car OBD plug.
NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.
Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.
NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.
For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf
AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming
For the full list of supported control units visit http://www.alfaobd.com
Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.
NOTE: If plots are not updated, make sure that "Force GPU rendering" is off in "Settings"->"Developer Option". AlfaOBD , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 116M installs. It sees impressive engagement 23K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. AlfaOBD was first released July 04, 2012, and has been continually updated, with the latest update rolled out just August 25, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 2.4.4.0. With 589 reviews, AlfaOBD maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
NOTE: FCA vehicles since MY2018 have security gateway module (SGW) installed. It blocks the third-party diagnostics. To have full access to the diagnostic features, please use an SGW bypass. Owners of Fiat 500X/JEEP Renegade/Compass (MP), please make sure that the bypass supports the second high-speed CAN bus, the one that is connected to the pins 12&13 of the car OBD plug.
NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.
Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.
NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.
For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf
AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming
For the full list of supported control units visit http://www.alfaobd.com
Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.
NOTE: If plots are not updated, make sure that "Force GPU rendering" is off in "Settings"->"Developer Option". AlfaOBD , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 116M installs. It sees impressive engagement 23K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. AlfaOBD was first released July 04, 2012, and has been continually updated, with the latest update rolled out just August 25, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 2.4.4.0. With 589 reviews, AlfaOBD maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
Car Launcher Pro
Car Launcher Pro
Car Launcher PRO — a launcher designed specifically for your car. Works on phones, tablets, and Android head units. It combines a convenient app launcher with a trip computer that tracks your distance over various periods (requires background GPS permission).
Key Features:
Set as the default launcher (for head units).
Unlimited apps on the home screen, folders for favorites (PRO feature).
Display current speed and trip data (GPS).
Speed in the status bar.
Quick list of all apps with sorting and uninstall option (long press).
Slide-out menu (trip computer), customizable to your needs. Data: speed (current/average/max), distance, time, acceleration (0-60/100/150 km/h), 1/4 mile. Reset statistics anytime.
View data for: current trip, day, week, month, all time.
Switch between km/h and mph.
Quick access to Google Assistant.
Auto-start (for head units).
3 themes + support for third-party themes, icon packs, music players with cover art.
Weather and location information.
On-screen volume control.
Custom splash screen, adjustable text colors and wallpapers.
Auto-brightness based on time of day.
Customizable screensaver/clock (layouts, fonts, date, colors, dimming).
System widgets and additional home screens.
Theme editor: resize, delete, move elements, assign multiple actions to a widget, lock widgets, change names and backgrounds.
Additional widgets: visualizer, analog clock & speedometer, address, driving/stop time, max speed, acceleration meters.
Favorites settings: infinite scroll, grid layout, curvature.
Custom logo and advanced color scheme settings.
🔐 Important Transparency Notice
Car Launcher uses the Android Accessibility Service.
Why? The service is required to recognize edge swipe gestures (Back, Home, Recent Apps) and convert them into system navigation actions. This provides convenient alternative control.
What the app does NOT do:
• It does NOT read, analyze, or collect your screen content, typed text, or personal data.
• It does NOT change system settings without your knowledge.
• It does NOT collect, store, or transmit your personal data or usage data.
Your Control & Privacy:
• Use of the service is voluntary.
• Upon first launch, a clear dialog will appear requesting access with an explanation.
• You can always disable it in your device settings: Android Settings → Accessibility → Car Launcher PRO.
Found an issue? Email: carlauncher@mail.ru Car Launcher Pro , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 266M installs. It sees impressive engagement 67K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. Car Launcher Pro was first released June 23, 2015, and has been continually updated, with the latest update rolled out just January 13, 2026. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 5.5.0.85. With 1193 reviews, Car Launcher Pro maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
Key Features:
Set as the default launcher (for head units).
Unlimited apps on the home screen, folders for favorites (PRO feature).
Display current speed and trip data (GPS).
Speed in the status bar.
Quick list of all apps with sorting and uninstall option (long press).
Slide-out menu (trip computer), customizable to your needs. Data: speed (current/average/max), distance, time, acceleration (0-60/100/150 km/h), 1/4 mile. Reset statistics anytime.
View data for: current trip, day, week, month, all time.
Switch between km/h and mph.
Quick access to Google Assistant.
Auto-start (for head units).
3 themes + support for third-party themes, icon packs, music players with cover art.
Weather and location information.
On-screen volume control.
Custom splash screen, adjustable text colors and wallpapers.
Auto-brightness based on time of day.
Customizable screensaver/clock (layouts, fonts, date, colors, dimming).
System widgets and additional home screens.
Theme editor: resize, delete, move elements, assign multiple actions to a widget, lock widgets, change names and backgrounds.
Additional widgets: visualizer, analog clock & speedometer, address, driving/stop time, max speed, acceleration meters.
Favorites settings: infinite scroll, grid layout, curvature.
Custom logo and advanced color scheme settings.
🔐 Important Transparency Notice
Car Launcher uses the Android Accessibility Service.
Why? The service is required to recognize edge swipe gestures (Back, Home, Recent Apps) and convert them into system navigation actions. This provides convenient alternative control.
What the app does NOT do:
• It does NOT read, analyze, or collect your screen content, typed text, or personal data.
• It does NOT change system settings without your knowledge.
• It does NOT collect, store, or transmit your personal data or usage data.
Your Control & Privacy:
• Use of the service is voluntary.
• Upon first launch, a clear dialog will appear requesting access with an explanation.
• You can always disable it in your device settings: Android Settings → Accessibility → Car Launcher PRO.
Found an issue? Email: carlauncher@mail.ru Car Launcher Pro , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 266M installs. It sees impressive engagement 67K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. Car Launcher Pro was first released June 23, 2015, and has been continually updated, with the latest update rolled out just January 13, 2026. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 5.5.0.85. With 1193 reviews, Car Launcher Pro maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
VAG DPF
VAG DPF
ATTENTION!! This app works only with VAG cars (Audi Volkswagen Seat Skoda Porsche) that are equipped with engines listed below; the full compatibility isn't guaranteed for engines not listed, so if you buy the app, please consider that some or all functions may not work properly.
This app doesn't work with other car manufacturers due to a different diagnostic protocol.
The app is now working on Android Auto.
VAG DPF forum: https://www.applagapp.com/forum/
VAG DPF F.A.Q.: https://www.applagapp.com/forum/viewtopic.php?f=9&t=319
VAG DPF shows you the most important information about the DPF particulate filter and its regeneration phases using an ELM327 Bluetooth/WIFI adapter. With this app you can know if the regeneration process is currently running, if a regeneration is waiting to be completed, how many km have you traveled since last regeneration, etc. This app doesn't use standard OBD2 commands as most other apps, it uses CANBUS commands and this is the reason why it needs a decent ELM327 adapter to work (see the note below).
IMPORTANT!! Before to buy the full app, I suggest to try the app "VAG DPF Free" to check that your adapter, your Android device and your engine work properly with the app.
Supported engines:
DETA, CRBC, CFHD,CUNA, CFFB, CFWA(*), CLHA, CXXB, CAYC (partially working on Passat 3C MY10), CAHA (beta, requires verification), CXHA, DTTC (not MY2022 and subsequent), CDUC
Engines tested successfully by users:
CFGB(*), CFGC, CJCA, CRMB, CUPA, CUSA, CXFA, CAYB, CAYD, CRLB, CUTA, CFHC, CAGA(*), CSHA, CJCD, DFSB, CLAB, DFLA, DCXA, CFCA, CGLC, CFJB, CFHA, CRUA, DDYA, DFFA, CRKB, DCYA, DFCA, CUUB, CGLB, CUAA, CUSB, CAPA(*), DFGA, DFSF, DFHA, CNHA, DGTA, DGTE(*), CCWA, DGDA, DLUB, CJCB, DGTD, CDUD, CSUD, DEUA, DAUA, DJGA, CXXA, DFEA, DBGC, CAYA, CRTD, DGDB, CUUA, DAVA, CKFC, CRCA, CGQB(*), DDDA, DCZA, CAAC, DNAA(*), CAAB, DTUA(§), CJCC, CXFA, CRTD, DTPA, DTRC, CVMD, DSRB
(*) = partial support or depending on SW version
(§) = only for 11-bit init protocol
IMPORTANT some of the engines above may be incompatible, it depends on the engine software version, so use the VAG DPF FREE app to check your engine before buy!!!!
Some words about ELM327 adapters:
- OBDLink LX: recommended, expensive but fast and reliable (I used it for the app development)
- Carista: recommended, affordable price but very reliable (I use it for debug and daily scans)
- Vgate iCar 2 Bluetooth : recommended, same as Carista
- Konnwei kw 903 : recommended, same as Carista
- China cloned adapter: not recommended, unreliable, you can randomly find decent adapters or fake adapters with unpredictable results
29-bit init protocol: Currently the app doesn't support the 29-bit protocol engines, but it's available the BETA engine group 97 that can be used for test, more details here:
https://www.applagapp.com/forum/viewtopic.php?f=4&t=20036&p=26560 VAG DPF , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 60M installs. It sees impressive engagement 16K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. VAG DPF was first released March 08, 2016, and has been continually updated, with the latest update rolled out just December 31, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 4.44.15. With 21 reviews, VAG DPF maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
This app doesn't work with other car manufacturers due to a different diagnostic protocol.
The app is now working on Android Auto.
VAG DPF forum: https://www.applagapp.com/forum/
VAG DPF F.A.Q.: https://www.applagapp.com/forum/viewtopic.php?f=9&t=319
VAG DPF shows you the most important information about the DPF particulate filter and its regeneration phases using an ELM327 Bluetooth/WIFI adapter. With this app you can know if the regeneration process is currently running, if a regeneration is waiting to be completed, how many km have you traveled since last regeneration, etc. This app doesn't use standard OBD2 commands as most other apps, it uses CANBUS commands and this is the reason why it needs a decent ELM327 adapter to work (see the note below).
IMPORTANT!! Before to buy the full app, I suggest to try the app "VAG DPF Free" to check that your adapter, your Android device and your engine work properly with the app.
Supported engines:
DETA, CRBC, CFHD,CUNA, CFFB, CFWA(*), CLHA, CXXB, CAYC (partially working on Passat 3C MY10), CAHA (beta, requires verification), CXHA, DTTC (not MY2022 and subsequent), CDUC
Engines tested successfully by users:
CFGB(*), CFGC, CJCA, CRMB, CUPA, CUSA, CXFA, CAYB, CAYD, CRLB, CUTA, CFHC, CAGA(*), CSHA, CJCD, DFSB, CLAB, DFLA, DCXA, CFCA, CGLC, CFJB, CFHA, CRUA, DDYA, DFFA, CRKB, DCYA, DFCA, CUUB, CGLB, CUAA, CUSB, CAPA(*), DFGA, DFSF, DFHA, CNHA, DGTA, DGTE(*), CCWA, DGDA, DLUB, CJCB, DGTD, CDUD, CSUD, DEUA, DAUA, DJGA, CXXA, DFEA, DBGC, CAYA, CRTD, DGDB, CUUA, DAVA, CKFC, CRCA, CGQB(*), DDDA, DCZA, CAAC, DNAA(*), CAAB, DTUA(§), CJCC, CXFA, CRTD, DTPA, DTRC, CVMD, DSRB
(*) = partial support or depending on SW version
(§) = only for 11-bit init protocol
IMPORTANT some of the engines above may be incompatible, it depends on the engine software version, so use the VAG DPF FREE app to check your engine before buy!!!!
Some words about ELM327 adapters:
- OBDLink LX: recommended, expensive but fast and reliable (I used it for the app development)
- Carista: recommended, affordable price but very reliable (I use it for debug and daily scans)
- Vgate iCar 2 Bluetooth : recommended, same as Carista
- Konnwei kw 903 : recommended, same as Carista
- China cloned adapter: not recommended, unreliable, you can randomly find decent adapters or fake adapters with unpredictable results
29-bit init protocol: Currently the app doesn't support the 29-bit protocol engines, but it's available the BETA engine group 97 that can be used for test, more details here:
https://www.applagapp.com/forum/viewtopic.php?f=4&t=20036&p=26560 VAG DPF , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 60M installs. It sees impressive engagement 16K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. VAG DPF was first released March 08, 2016, and has been continually updated, with the latest update rolled out just December 31, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 4.44.15. With 21 reviews, VAG DPF maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
bimmer-tool
bimmer-tool
bimmer-tool allows to read & clear fault codes, request DPF regeneration, read engine live data and much more in BMW cars.
Try bimmer-tool lite to see whether the app is compatible with your BMW and your OBD adapter.
For cars below model year 2008 application functionality is limited and K+DCan USB cable connection is recommended. Wireless ELM adapter connection with cars below 2008 may not be possible or not all functions may be available.
Important: This application requires a reliable OBD adapter. K+D-Can cable, ENET adapter (for F/G series) or below Bluetooth adapters are recommended:
- Vgate vLinker MC/FS/BM/FD https://www.vgatemall.com/products/
- UniCarScan UCSI-2000/USCI-2100: Choose setting: D-Can mode: MODE2 https://www.wgsoft.de/shop/obd-2-komplettsysteme/unicarscan/114/unicarscan-ucsi-2000-diagnoseadapter
https://www.bmdiag.co.uk/unicarscan-ucsi-2000-bluetooth-obd2-adapter
- Carista https://caristaapp.com/adapter
- Veepeak OBDCheck BLE https://www.veepeak.com/product/obdcheck-ble
Application allows to:
- read DPF regeneration status and detailed information
- request DPF regeneration
- reset DPF adaptation values (required after filter replacement)
- read exhaust fumes pressure
- read injectors adjustments
- read actual and expected values for air mass, intake manifold pressure, fuel pressure
- log data to CSV file for further analysis
- register battery replacement (without changing battery properties)
- reset lamps circuits blocked due to short-circuit error in E-series
- reset oil/brakes service and change interval**
Supported OBD adapters
- K+D-Can USB: This is recommended and most reliable adapter. You will also need USB-OTG cable.
- ENET cable/Wifi Adapter: recommended for F & G series. ENET cable connections you need additionally USB-C to Ethernet adapter.
- ELM327 Bluetooth: Bluetooth connection may be slower than USB. Only genuine ELM327 or PIC18-based adapters will work. It may not work with older engines. More info below.
- ELM327 WiFi: Like ELM Bluetooth connection may be less stable. On some devices mobile data transmission needs to be disabled to use WiFi adapter.
If you have questions or need any help send me an email. You can find our address at the bottom of the page.
Quick start
1) Connect adapter to OBD II socket
2) Turn ignition on
3) Connect adapter to your phone:
* USB: Connect adapter to the phone using USB-OTG cable. Phone will ask which app to start - choose bimmer-tool app.
* Bluetooth: Go to phone Bluetooth setting. Search for Bluetooth devices and pair the adapter with the phone (PIN is usually 0000 or 1234).
* Wifi: Turn mobile data transmission off. Turn WiFi on and search for available WiFi networks. Connect the phone to the adapter's WiFi.
4) Start the app, go to 'Car' and choose model and year.
5) Go to 'Connection' and choose connection type, adapter type and communication protocol.
6) Tap 'Connect' button.
**Limitations:
For mlodels below 2008 and e46/e39/e83/e53 the app requires K+DCan cable connection and only engine ECU is supported. Connection using a wireless ELM adapter may not be possible.
Common problems
- Engine 'No response' error in cars up to 2007 and BT/Wifi adapter. If this error occurs from time to time, try selecting ATWM option under advanced connection settings.
- No connection: If adapter & protocol settings are correct and app still cannot connect to the car try force stop all diagnostic applications in application manager (including bimmer-tool) or restart the phone and try to connect again.
Why this app requires permissions?
- Storage: required for USB adapters support
- Photos / Media / Files: allows to create CSV files
- Pair with Bluetooth devices/access Bluetooth settings: required for Bluetooth adapters support
- Full network access: required for WiFi adapters support
- Approximate location: Theoretically it is possible to find approximate location using Bluetooth, however this app does not read/use location. bimmer-tool , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 43M installs. It sees impressive engagement 33K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. bimmer-tool was first released August 01, 2017, and has been continually updated, with the latest update rolled out just March 27, 2026. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 3.8.24. With 712 reviews, bimmer-tool maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
Try bimmer-tool lite to see whether the app is compatible with your BMW and your OBD adapter.
For cars below model year 2008 application functionality is limited and K+DCan USB cable connection is recommended. Wireless ELM adapter connection with cars below 2008 may not be possible or not all functions may be available.
Important: This application requires a reliable OBD adapter. K+D-Can cable, ENET adapter (for F/G series) or below Bluetooth adapters are recommended:
- Vgate vLinker MC/FS/BM/FD https://www.vgatemall.com/products/
- UniCarScan UCSI-2000/USCI-2100: Choose setting: D-Can mode: MODE2 https://www.wgsoft.de/shop/obd-2-komplettsysteme/unicarscan/114/unicarscan-ucsi-2000-diagnoseadapter
https://www.bmdiag.co.uk/unicarscan-ucsi-2000-bluetooth-obd2-adapter
- Carista https://caristaapp.com/adapter
- Veepeak OBDCheck BLE https://www.veepeak.com/product/obdcheck-ble
Application allows to:
- read DPF regeneration status and detailed information
- request DPF regeneration
- reset DPF adaptation values (required after filter replacement)
- read exhaust fumes pressure
- read injectors adjustments
- read actual and expected values for air mass, intake manifold pressure, fuel pressure
- log data to CSV file for further analysis
- register battery replacement (without changing battery properties)
- reset lamps circuits blocked due to short-circuit error in E-series
- reset oil/brakes service and change interval**
Supported OBD adapters
- K+D-Can USB: This is recommended and most reliable adapter. You will also need USB-OTG cable.
- ENET cable/Wifi Adapter: recommended for F & G series. ENET cable connections you need additionally USB-C to Ethernet adapter.
- ELM327 Bluetooth: Bluetooth connection may be slower than USB. Only genuine ELM327 or PIC18-based adapters will work. It may not work with older engines. More info below.
- ELM327 WiFi: Like ELM Bluetooth connection may be less stable. On some devices mobile data transmission needs to be disabled to use WiFi adapter.
If you have questions or need any help send me an email. You can find our address at the bottom of the page.
Quick start
1) Connect adapter to OBD II socket
2) Turn ignition on
3) Connect adapter to your phone:
* USB: Connect adapter to the phone using USB-OTG cable. Phone will ask which app to start - choose bimmer-tool app.
* Bluetooth: Go to phone Bluetooth setting. Search for Bluetooth devices and pair the adapter with the phone (PIN is usually 0000 or 1234).
* Wifi: Turn mobile data transmission off. Turn WiFi on and search for available WiFi networks. Connect the phone to the adapter's WiFi.
4) Start the app, go to 'Car' and choose model and year.
5) Go to 'Connection' and choose connection type, adapter type and communication protocol.
6) Tap 'Connect' button.
**Limitations:
For mlodels below 2008 and e46/e39/e83/e53 the app requires K+DCan cable connection and only engine ECU is supported. Connection using a wireless ELM adapter may not be possible.
Common problems
- Engine 'No response' error in cars up to 2007 and BT/Wifi adapter. If this error occurs from time to time, try selecting ATWM option under advanced connection settings.
- No connection: If adapter & protocol settings are correct and app still cannot connect to the car try force stop all diagnostic applications in application manager (including bimmer-tool) or restart the phone and try to connect again.
Why this app requires permissions?
- Storage: required for USB adapters support
- Photos / Media / Files: allows to create CSV files
- Pair with Bluetooth devices/access Bluetooth settings: required for Bluetooth adapters support
- Full network access: required for WiFi adapters support
- Approximate location: Theoretically it is possible to find approximate location using Bluetooth, however this app does not read/use location. bimmer-tool , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 43M installs. It sees impressive engagement 33K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. bimmer-tool was first released August 01, 2017, and has been continually updated, with the latest update rolled out just March 27, 2026. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 3.8.24. With 712 reviews, bimmer-tool maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
CVTz50
CVTz50
To verify CVTz50 compatibility with your ELM327 adapter and vehicle, please use CVTz50 DEMO: https://play.google.com/store/apps/details?id=com.cvtz50.cvtz50demo
Main features
- Read and clear CVT diagnostic trouble codes
- Read and clear engine diagnostic trouble codes
- Read and clear CVT fluid deterioration
- Adjust engine braking level
- Adjust Idle RPM and Ignition timing; Idle air volume learning (only for Murano Z50 and related vehicles produced before 2010)
- CVT Data Monitor: real-time monitoring of CVT parameters: temperature, pressures, trouble codes, gear ratios, step motor position, torque converter lockup
- Collecting and displaying monthly statistics on temperature conditions, pressures, milage, fluid deterioration
- Supports Nissan Murano Z50/Z51, partial support of other vehicles equipped with Jatco CVT – Nissan Teana, X-Trail, Qashqai, Juke, Note, Tiida, Sentra, Wingroad; Mitsubishi Outlander, Lancer; Renault Koleos and others
Hardware requirements:
- Phone or tablet running Android 4.2+
- Bluetooth or WiFi adapter ELM327 revision 1.5 or lower (functionality might be significantly limited if used with not genuine adapters of revision 2.0+) CVTz50 , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 125M installs. It sees impressive engagement 34K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. CVTz50 was first released April 21, 2016, and has been continually updated, with the latest update rolled out just December 21, 2023. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 1.54. With 2499 reviews, CVTz50 maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
Main features
- Read and clear CVT diagnostic trouble codes
- Read and clear engine diagnostic trouble codes
- Read and clear CVT fluid deterioration
- Adjust engine braking level
- Adjust Idle RPM and Ignition timing; Idle air volume learning (only for Murano Z50 and related vehicles produced before 2010)
- CVT Data Monitor: real-time monitoring of CVT parameters: temperature, pressures, trouble codes, gear ratios, step motor position, torque converter lockup
- Collecting and displaying monthly statistics on temperature conditions, pressures, milage, fluid deterioration
- Supports Nissan Murano Z50/Z51, partial support of other vehicles equipped with Jatco CVT – Nissan Teana, X-Trail, Qashqai, Juke, Note, Tiida, Sentra, Wingroad; Mitsubishi Outlander, Lancer; Renault Koleos and others
Hardware requirements:
- Phone or tablet running Android 4.2+
- Bluetooth or WiFi adapter ELM327 revision 1.5 or lower (functionality might be significantly limited if used with not genuine adapters of revision 2.0+) CVTz50 , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 125M installs. It sees impressive engagement 34K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. CVTz50 was first released April 21, 2016, and has been continually updated, with the latest update rolled out just December 21, 2023. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 1.54. With 2499 reviews, CVTz50 maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
inCarDoc Pro | OBD2
inCarDoc Pro | OBD2
Before purchasing please check the car and OBD2 scanner compatibility with the free version of inCarDocr https://goo.gl/imxGhN
Requires ELM327 or compatible OBD scanner. Supported: OBD-II (Bluetooth, WiFi, Kiwi 3 (BLE), V-Gate iCar 3 (BLE), Veepeak (BLE), Carista, Vinli); GPS-only and Demo modes. Read more at inCarDoc.com Limited functionality available w/o ELM327 possible only in GPS mode: Speed, Altitude
• real time parameters recording
• read & display multiple parameters
• recording parameters in background mode
• view recorded parameters traces
• GPS traces support
• upload to server http://inCarDoc.com
• extended widgets: fuel economy, acceleration
• overlay to present economy data over any application screen
• GPS parameters: speed, altitude
• register and upload data to web
• console mode: for advanced users, direct OBD2 and ELM327 commands sending
• use custom configurations for non-standard parameters and protocols
Avoid!!! simultaneous running of multiple OBD-II reading apps, be sure that other apps does not keeping live Bluetooth/WiFi connection via ELM327 OBD2 scanner.
Used to self- identify application when at background
• Location
Extra GPS parameters: GPS speed, altitude, position for fueling and service search
• Photos/Media/Files
Store and read "Logbook" and Debug data as direct user's actions
• Other
Bluetooth related - communication with external OBD2 scanner
Internet related - publishing "Logbook" records to server as direct user's actions
Drawing over other apps – presenting economy and selected parameters over other app’s screens
Warning!!! There are reports on issues when using some cheap "clones" of ELM327 (mostly marked as v2.1)! Read more at our forum https://goo.gl/9qiBSv
You are always welcome @
🌐 our site http://inCarDoc.com
Thank you!!! inCarDoc Pro | OBD2 , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 345M installs. It sees impressive engagement 72K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. inCarDoc Pro | OBD2 was first released March 05, 2013, and has been continually updated, with the latest update rolled out just October 08, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 7.8.9. With 2041 reviews, inCarDoc Pro | OBD2 maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
🔌 Your connected car 🚘
inCarDoc Pro - best doctor for your car: Check Engine codes reader, diagnostics, scanner, monitor and logbook tool: reads real-time and stored diagnostics parameters from ECU of OBD-II compliant cars.Before purchasing please check the car and OBD2 scanner compatibility with the free version of inCarDocr https://goo.gl/imxGhN
Requires ELM327 or compatible OBD scanner. Supported: OBD-II (Bluetooth, WiFi, Kiwi 3 (BLE), V-Gate iCar 3 (BLE), Veepeak (BLE), Carista, Vinli); GPS-only and Demo modes. Read more at inCarDoc.com Limited functionality available w/o ELM327 possible only in GPS mode: Speed, Altitude
🏆 Pro version features:
• no ads• real time parameters recording
• read & display multiple parameters
• recording parameters in background mode
• view recorded parameters traces
• GPS traces support
• upload to server http://inCarDoc.com
• extended widgets: fuel economy, acceleration
• overlay to present economy data over any application screen
🛠 Car diagnostics
Works as fault codes OBD2 scanner, reads Check Engine (MIL) state, details, related freeze frame data, finds descriptions and clears stored diagnostic trouble codes (DTC). Allows to store and share diagnostics data when looking for a professional service/repair assistance. Please note that app supports only parameters and ECU's specified with OBD-II standard, that is Engine and Emission systems.⏲ Real-time parameters
Reads real-time engine and vehicle OBD2 parameters PIDs from car’s sensors: speed, rotation (rpm), coolant temperature, pressure, O2 oxygen sensors and multiple other PIDs. Available chart drawing and analog/digital widgets presentation. Please note that exact list of scanned OBD2 parameters depends on your car make/model/year.⛽ Economizer:
Trip Computer mode for presenting and tracking car’s fuel economy/consumption. Presents both in-drive (instant and average MPG) as well as per trip, per day and other statistics. Please note, that feature available when appropriate OBD2 economy parameters (MAF or MAP+IAT+RPM) are supported in your car. For correct calculations you may need to enter Engine displacement (in cubic cm) and volumetric efficiency (in %, the default is 80).♾ Other features:
• logbook notes: fueling, service records, car maintenance, diagnostics• GPS parameters: speed, altitude
• register and upload data to web
• console mode: for advanced users, direct OBD2 and ELM327 commands sending
• use custom configurations for non-standard parameters and protocols
🌐 site http://inCarDoc.com
Avoid!!! simultaneous running of multiple OBD-II reading apps, be sure that other apps does not keeping live Bluetooth/WiFi connection via ELM327 OBD2 scanner.
Required permissions:
• Device & app historyUsed to self- identify application when at background
• Location
Extra GPS parameters: GPS speed, altitude, position for fueling and service search
• Photos/Media/Files
Store and read "Logbook" and Debug data as direct user's actions
• Other
Bluetooth related - communication with external OBD2 scanner
Internet related - publishing "Logbook" records to server as direct user's actions
Drawing over other apps – presenting economy and selected parameters over other app’s screens
Warning!!! There are reports on issues when using some cheap "clones" of ELM327 (mostly marked as v2.1)! Read more at our forum https://goo.gl/9qiBSv
You are always welcome @
🌐 our site http://inCarDoc.com
Thank you!!! inCarDoc Pro | OBD2 , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 345M installs. It sees impressive engagement 72K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. inCarDoc Pro | OBD2 was first released March 05, 2013, and has been continually updated, with the latest update rolled out just October 08, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 7.8.9. With 2041 reviews, inCarDoc Pro | OBD2 maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
Engine Sound Simulator for EV
Engine Sound Simulator for EV
EngineSim uses your electric vehicle's electricity consumption data to estimate a virtual RPM and generates realistic engine sounds. It works within your car's media player and offers detailed customization, 12 different sound options, and automatic or manual gear simulation.
✅ COMPATIBLE with
🚘Volvo's XC40 Recharge, EX40, C40, EC40, EX30, EX90, T8 Recharge Pure Mode, T8 Recharge Hybrid Mode (with less accuracy)...
🚘Polestar's PS2...
🚘Renault's Megane, Scenic, R5...
🚘Chevrolet's Blazer, Equinox...
🚘Honda's Prologue...
🚘Cadillac's Lyriq...
and many more vehicles!
⚠️ If your car isn't listed here, you can try EngineSim and ask for a refund if you have compatibility issues.
⚠️ NOT COMPATIBLE with
🚘Polestar 3.
Features:
🎶 Many Sound Options: Choose from 10 realistic engine sounds or 2 synthesized ambient sounds. Easily switch between options while driving.
⚙️ Fully Configurable: Change parameters like motor power, idle power usage, max RPM, min RPM, and RPM smoothing option to increase the accuracy & realism further.
🕹️ Gear Simulation: Configure the app to simulate virtual gears. The estimated RPM will respond to virtual upshifts & downshifts and become reactive to vehicle speed. You may also try manual shifting via the steering wheel buttons.
🎯 Optimized for Volvo EVs: EngineSim is explicitly designed for Volvo vehicles. UI and estimation algorithms are compliant with most Volvo infotainment systems running AAOS.
🛡️ Completely Offline: EngineSim doesn't require an internet connection and stores no personal data. Engine Sound Simulator for EV , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 250K installs. It sees impressive engagement 4K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. Engine Sound Simulator for EV was first released January 30, 2026, and has been continually updated, with the latest update rolled out just March 09, 2026. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 1.17. Engine Sound Simulator for EV maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
✅ COMPATIBLE with
🚘Volvo's XC40 Recharge, EX40, C40, EC40, EX30, EX90, T8 Recharge Pure Mode, T8 Recharge Hybrid Mode (with less accuracy)...
🚘Polestar's PS2...
🚘Renault's Megane, Scenic, R5...
🚘Chevrolet's Blazer, Equinox...
🚘Honda's Prologue...
🚘Cadillac's Lyriq...
and many more vehicles!
⚠️ If your car isn't listed here, you can try EngineSim and ask for a refund if you have compatibility issues.
⚠️ NOT COMPATIBLE with
🚘Polestar 3.
Features:
🎶 Many Sound Options: Choose from 10 realistic engine sounds or 2 synthesized ambient sounds. Easily switch between options while driving.
⚙️ Fully Configurable: Change parameters like motor power, idle power usage, max RPM, min RPM, and RPM smoothing option to increase the accuracy & realism further.
🕹️ Gear Simulation: Configure the app to simulate virtual gears. The estimated RPM will respond to virtual upshifts & downshifts and become reactive to vehicle speed. You may also try manual shifting via the steering wheel buttons.
🎯 Optimized for Volvo EVs: EngineSim is explicitly designed for Volvo vehicles. UI and estimation algorithms are compliant with most Volvo infotainment systems running AAOS.
🛡️ Completely Offline: EngineSim doesn't require an internet connection and stores no personal data. Engine Sound Simulator for EV , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 250K installs. It sees impressive engagement 4K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. Engine Sound Simulator for EV was first released January 30, 2026, and has been continually updated, with the latest update rolled out just March 09, 2026. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 1.17. Engine Sound Simulator for EV maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
Hush: Android Auto Audio Fix
Hush: Android Auto Audio Fix
Android Auto is great, but sometimes you want Google Maps while listening to audio from an app that doesn't support Android Auto.
Unfortunately, there's a known issue with some vehicle's Android Auto implementation that causes Android Auto to resume the last Android Auto audio app you were listening to if you change the volume while listening to a non-Android Auto audio app such as YouTube.
Nothing's more distracting while driving than going from a soft podcast on YouTube to deafening music on Spotify in a fraction of a second.
Hush fixes this and other Android Auto audio-related issues by playing a silent audio track on repeat, leaving you free to safely adjust your vehicle's volume and enjoy your audio.
Once launched, Hush will act as the currently active audio app, preventing Spotify/YouTube music from being resumed by AA whilst you listen to your favourite non-Android Autoaudio app.
I developed Hush after putting up with this issue for years in my Toyota Camry. I've mentioned this issue to my Toyota dealer every time I get my car serviced, but they just say all updates have been installed and there's nothing they can do. Hush: Android Auto Audio Fix , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 2M installs. It sees impressive engagement 24K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. Hush: Android Auto Audio Fix was first released April 28, 2024, and has been continually updated, with the latest update rolled out just September 07, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 1.4. With 77 reviews, Hush: Android Auto Audio Fix maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
Unfortunately, there's a known issue with some vehicle's Android Auto implementation that causes Android Auto to resume the last Android Auto audio app you were listening to if you change the volume while listening to a non-Android Auto audio app such as YouTube.
Nothing's more distracting while driving than going from a soft podcast on YouTube to deafening music on Spotify in a fraction of a second.
Hush fixes this and other Android Auto audio-related issues by playing a silent audio track on repeat, leaving you free to safely adjust your vehicle's volume and enjoy your audio.
Once launched, Hush will act as the currently active audio app, preventing Spotify/YouTube music from being resumed by AA whilst you listen to your favourite non-Android Autoaudio app.
I developed Hush after putting up with this issue for years in my Toyota Camry. I've mentioned this issue to my Toyota dealer every time I get my car serviced, but they just say all updates have been installed and there's nothing they can do. Hush: Android Auto Audio Fix , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 2M installs. It sees impressive engagement 24K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. Hush: Android Auto Audio Fix was first released April 28, 2024, and has been continually updated, with the latest update rolled out just September 07, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 1.4. With 77 reviews, Hush: Android Auto Audio Fix maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
scan my tesla
scan my tesla
Gives you real-time readings from Tesla Model S, 3, X, Y diagnostics port
* This app needs an adapter cable and a certain type of OBD2 adapter to work * - please check our info pages at https://www.scanmytesla.com/adapters
Scan My Tesla reads information from the diagnostics port of your Tesla Model S, 3, or X, to present visually, or log for later analysis.
This app gives you numerous live statistics such as:
- Battery power / voltage / current / temperatures
- Drive Unit electric power / torque / horsepower* / RPM / temperatures
- Battery lifetime stats, capacity estimates and mileage
- 12V system current, voltage, temperature
- Trip recording and statistics, including regenerated and charged energy
(* currently not available on Model 3)
Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)
Model 3 decoding community led by JWardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/
Contains elements of Android OS example code adhering to Apache 2.0 license
Go here for more information:
https://sites.google.com/view/scanmytesla/
Facebook page:
https://www.facebook.com/scanmytesla/
Model 3 specific information
https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/
Disclaimer
This software is not affiliated with Tesla Motors
Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works.
The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.
Børsand Engineering assumes no responsibility for errors or omissions in the contents on the Service.
In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.
This Disclaimer is licensed by TermsFeed Generator. scan my tesla , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 28M installs. It sees impressive engagement 22K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. scan my tesla was first released July 21, 2017, and has been continually updated, with the latest update rolled out just November 26, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 3.1.4. With 67 reviews, scan my tesla maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
* This app needs an adapter cable and a certain type of OBD2 adapter to work * - please check our info pages at https://www.scanmytesla.com/adapters
Scan My Tesla reads information from the diagnostics port of your Tesla Model S, 3, or X, to present visually, or log for later analysis.
This app gives you numerous live statistics such as:
- Battery power / voltage / current / temperatures
- Drive Unit electric power / torque / horsepower* / RPM / temperatures
- Battery lifetime stats, capacity estimates and mileage
- 12V system current, voltage, temperature
- Trip recording and statistics, including regenerated and charged energy
(* currently not available on Model 3)
Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)
Model 3 decoding community led by JWardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/
Contains elements of Android OS example code adhering to Apache 2.0 license
Go here for more information:
https://sites.google.com/view/scanmytesla/
Facebook page:
https://www.facebook.com/scanmytesla/
Model 3 specific information
https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/
Disclaimer
This software is not affiliated with Tesla Motors
Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works.
The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.
Børsand Engineering assumes no responsibility for errors or omissions in the contents on the Service.
In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.
This Disclaimer is licensed by TermsFeed Generator. scan my tesla , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 28M installs. It sees impressive engagement 22K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. scan my tesla was first released July 21, 2017, and has been continually updated, with the latest update rolled out just November 26, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 3.1.4. With 67 reviews, scan my tesla maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
CL Theme C1
CL Theme C1
Warning.
This is not an application, but a theme for Car Launcher.
Introducing a new theme for Car Launcher v 4.5+.
How to install the theme:
1. Open Car Launcher.
2. Open the settings and click "Select Theme".
3. Click on the desired theme. CL Theme C1 , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 3M installs. It sees impressive engagement 58K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. CL Theme C1 was first released December 18, 2024, and has been continually updated, with the latest update rolled out just July 08, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 1.3. CL Theme C1 maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.
This is not an application, but a theme for Car Launcher.
Introducing a new theme for Car Launcher v 4.5+.
How to install the theme:
1. Open Car Launcher.
2. Open the settings and click "Select Theme".
3. Click on the desired theme. CL Theme C1 , a leading app in the Auto & Vehicles Apps category, boasts a robust user base with a total of 3M installs. It sees impressive engagement 58K daily installs, reflecting its popularity and usability. The app generates significant monthly revenue, indicative of its effective monetization strategies and user satisfaction. The app supports in-app purchases, allowing users to enhance their experience with additional features and content. CL Theme C1 was first released December 18, 2024, and has been continually updated, with the latest update rolled out just July 08, 2025. This commitment to regular updates ensures that users always have access to the latest features and improvements. The app and is currently on version 1.3. CL Theme C1 maintains a strong presence in the market, supported by numerous rating votes that attest to its reliability and effectiveness in helping users achieve their Top charts paid play goals.